Lead-free Soldering Iron Tip for Solder Iron Repair Station 900M 900M-T 936/937/938/969/8586/852D

1. When using a new soldering tip, the first, temperature was adjusted to 250°C, repeat coated the tin for about 8 minutes. 2. After use, wait until the temperature down, coated the soldering tip with tin is sealed to prevent oxidation. 3. For already oxidized iron head, cleaning with a low activity flux, and then coated repeatedly with new solder. These tips are made from oxygen-free copper, easy to tin and diamagnetic, suitable for lower temperature soldering. There are total 15 types of soldering tips in this set and you can choose the proper one for different soldering needs. Don't leave your iron running for hours and hours if you are not using it. This can make the tip get black oxide cover. Try to tin the tip as it heats. If you leave it on too long or run it too hot it will burn off the solder and go black. These soldering tips are suitable for 936, 937, 938, 969, 8586, 852D soldering stations. Aoyue T Series Soldering Iron Tips 453 Soldering Iron, 701A+ Repair System, 701 Repair System, 899 Repair System, 899A+ Repair System, 906 Repair System, 909 Repair System, 936 Soldering Station, 936A Soldering Station, 937 Soldering Station, 937+ Soldering Station, 968 Repair System, Int768 Repair System. But not fit to Aoyue 2702A+ and 2900, 2901. Please attention. Package: 1X Soldering Iron Tip 900M-T-K 1X Soldering Iron Tip 900M-T-B 1X Soldering Iron Tip 900M-T-I 1X Soldering Iron Tip 900M-T-1C 1X Soldering Iron Tip 900M-T-2C 1X Soldering Iron Tip 900M-T-3C 1X Soldering Iron Tip 900M-T-4C 1X Soldering Iron Tip 900M-T-0.8D 1X Soldering Iron Tip 900M-T-1.2D 1X Soldering Iron Tip 900M-T-1.6D 1X Soldering Iron Tip 900M-T-2.4D 1X Soldering Iron Tip 900M-T-3.6D

• Fit to Hakko Atten Quick Saike Kada Aoyue and other Brand Iron Station.
• Compatible with the following Aoyeue systems:
• FOR: 900M.933.376.907.913.951,898D,852D+
• These tips are plated with lead-free solder.
• For already oxidized iron head, cleaning with a low activity flux, and then coated repeatedly with new solder.